Most flexible induction pipe bending machines on the market
Most economic to run with patented technology
Simple to operate with PLC operation
Quickest tool set-up and cycle time
The most affordable induction forming solution when compared to other machines
The entire range of pipes can be induction bent from 3” (76mm) cast pipes up to 84” 2,000mm
Typical applications include line pipe bending, road gantries and signs, bridge tube bending, mining and quarry pipes, petrochemical piping.
Materials bent include Carbon Steel pipe, Stainless Steel and its alloys, forged and spun cast pipe, clad pipe.
The standard radii range is 3d to 10d however the machine is capable of bending up to 300 metre /1000ft radii using specialist tooling.
|Serial size||Maximum power||Maximum Pipe Size and thickness||Maximum thickness in smaller pipe||Pipe Range
|IF 6||100kw||6" x 20mm||25mm||2 - 6"|
|IF10||160kw||10" x 30mm||30mm||2 - 10"|
|IF16||300Kw||16"x 35mm||50mm||2 - 16"
|IF20||400kw||20" x 40mm||50mm||6 - 24"
|IF24||500kw||24" x 40mm||60mm||8 - 24"
|IF30||600kw||30" x 40mm||60mm||10 - 30"
|IF36||800kw||36" x 50mm||80mm||12 - 36"
|IF42||1000kw||42" x 50mm||100mm||16 - 42"
|IF48||1200kw||48" x 50mm||100mm||20 - 48"
We have more structural section bending experience than any other induction bending machine manufacturer. If the result matters, Inductaflex should be your 1st choice.
All sizes of square tubes can be curved with minimum distortion. The results are far superior to any other induction bending machine manufacturer. The specialist tooling having been developed at the World’s largest structural steel bending company.
Typical applications include, curved metal sections for renewable and offshore constructions, curved structural sections in buildings, parts for mining and quarry equipment.
Maximum permissible variations
Coolant flowrate or pressure
Induction heating frequency
± 2.5 mm/min
± 25 °C
± 10 %
± 15 °C
± 20 %